供應小金井氣缸軸接頭,KOGANEI氣缸軸接頭
?? The threaded depth in the
cylinder rod socket should be within the
value shown in the catalog. As a
 guide, it should be in a position
about 1 or 2 rotations back from
where it reaches the bottom.
Consult us for any use other
than for the air cylinder.
?? The cylinder joint stud can rotate,

供應小金井氣缸軸接頭,KOGANEI氣缸軸接頭
but primarily the cylinder joint is
not designed as a rotary joint,
so it should not be used as a rotaryjoint.
?? It cannot be used again after disassembled.
?? The lubricant has been filled in the body.
??Aligning the axial center and correcting
the parallelism can beperformed easily.
??High machining accuracy for
aligning the axial center is notrequired.
??Time taken for installation can be greatly reduced.