寶得二位二通活塞閥描述，德國BURKERT活塞閥規格
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；
[email protected]
地址：上海市嘉定區江橋嘉涌路99弄6號713室
Protection class IP65 with cable plug Installation as required, preferably with actuator upright
? Push-over solenoid system
? special versions, up to 250 bar, up to DN 12
重疊的線圈系統
*溫版本，至
2/2-way Solenoid Valve Servo Operated for High Pressure
The servo-assisted Type 2400 valve has aservo-piston with a 2-way servo-control.
It is designed for high pressures.
The speciality of this valve design lies in the layout of the seat and sealing element.
Anadditional radial seal make very good sealing possible.
先導式閥 2400 具有一個伺服活塞，該活塞帶有雙向先導式控制裝置。
+55 °C Viscosity ca. 21 mm/s Operating voltage 24/DC 24/220-230 V / 50 Hz
other voltages on request Voltage tolerance ±10% Cycling rate ca.
80/min Duty cycle 100 % continuous rating Electrical connection Cable plug (part of the delivery)
? stainless steel body
An additional radial seal make very good sealing possible.
The tapered sealing element of the servocontrol permits the switching of high pressure at relatively low coil power.
Technical data Body material stainless steel, brass and stainless steel,
nickel-plated Valve internals stainless steel Sealing material PEEK/FKM; PCTFE/FKM;
PTFE/FKM Media neutral gases and fluids Medium temperature PEEK/FKM PCTFE/FKM
PTFE/FKM 14°F up to 176°F (-10°C up to +80°C) 14°F up to 176°F
(-10°C up to +80°C) 14°F up to 176°F (-10°C up to +80°C) Ambient temperature max.
131°F (+55°C) Viscosity ca. 21 cSt Operating voltage 24/DC 24/220-230 V / 50 Hz other voltages o
n request Voltage tolerance ± 10% Cycling rate ca. 80/min Duty cycle 100% continuous
rating Electrical connection Cable plug (part of the delivery) Protection class IP65
with cable plug Installation as required, preferably with actuator upright
先導式控制裝置的錐形密封元件，允許在沖洗功率相對較小的情況下接通*壓。
Ori? ce Kv-value water
Port connection
Pressure range Electrical power consumption
Response times Weight
[mm] [m/h] AC [bar] DC [bar] Inrush Hold Opening [ms] Closing [ms] [kg]
5.0 0.6 G 1/4 1–250 1–200 AC 85 VA 48 VA/20 W 100 300 1.2 8.0 1.0 G 3/8
1–250 1–210 bis bis 1.4 12.0 2.6 G 1/2 1–250 1–160 DC 20 W 20 W 200 500 1.95
Kv value [mm/h]: Flow rate value for water, measured at +20 °C
其設計適合*壓。這種閥門結構的特征在于閥座和密封元件的設計。
通過一個附加的徑向密封件能夠實現很*的密封性。
and 1 bar pressure differential over a fully opened valve. Pressure data [bar]:
Overpressure with respect to atmospheric pressure Response times [ms]:
m easured at valve outlet at 6 bar and +20 °C Opening pressure build-up 0…90% Closing: pressure relief 100…10%
The servo-assisted Type 2400 valve has a servo-piston with a 2-way servo-control. It is designed for high pressures.
The speciality of this valve design lies in the layout of the seat and sealing element.
The tapered sealing element of the servocontrol permits the switching of high pressureat relatively low coil power.
Technical data Body material stainless steel, brass and brass,
nickel-plated Valve internals stainless steel Sealing material PEEK/FKM; PCTFE/FKM;
PTFE/FKM Media neutral gases and ? uids Medium temperature
PEEK/FKM PCTFE/FKM PTFE/FKM –10 to +80 °C –10 to +80 °C –10 to +80 °C Ambient temperature max.
