TURCK接近開關訂貨號1055002

圖爾克接近開關選型資料：
焊接傳感器有不同的版本，不同的信號強度和直徑。
The spares have to be made of ferromagnetic material
in order to guarnatee correct performance.
Mostapplications need center bolts to retain the welding nutsand reinforcing sleeves and thus provide mechanical
protection of the sensors.
因此可以檢測到其材料屬性中十分不同的鐵磁元件。
工作電壓 10…30 VDC
余波 e 10 % Uss
直流額定工作電流 e 200 mA
空載電流 I0 e 15 mA
漏電流 e 0.1 mA
The magnetic field sensor for detection of
ferromagnetic parts is espcially suited for the detection
of welding nuts as well as spacer or reinforcing sleeves.
靈敏區域的距離 S=11mm
當出現被測物時，在靈敏區域內的傳感器信號將會發生變化。
的區域距離 M=14mm
假設靈敏區域能夠被完全覆蓋，那么信號強度能夠達到值。
Theses bolts have to bemade of non-ferromagnetic material, like stainless steelfor example.
Center bolts are not available at Turck, asthese have to be produced individually and adjusted tothe correspondent application.
The weld sensor detects targets with diametersbetween 10 and 20 mm easily
隔離測試電壓 e 0.5 kV
短路保護 是/ 循環
壓降在 Ie e 1 V
斷路/反極性保護 是/ 是
輸出** 3線, 可編程式連接, PNP
被測物必須被置于所謂的靈敏區域，以便能被檢測到。
如果被測物能夠完全覆蓋靈敏區域，傳感器內部信號將達到強度。部分覆蓋也能夠被測到。

TURCK接近開關訂貨號1055002